Skip to content
English
  • There are no suggestions because the search field is empty.

GO Lift Tube Spacer Installation

Let me quickly walk you through the process.


  1. Raise the pod to the highest position.

  2. Loosen the locating pin with a 5mm Allen Wrench.  Take the bolts and locating pin completely out.

     

     

     

  3. Grab a shim that was sent to you.

     

     

  4. Apply a dab of grease or anything that will help the shim stay on the pin.  A piece of scotch tape will work as well.

     

     

  5. Align the holes.

     

     

  6. Carefully place the pin and shim into the frame.

     

     

  7. Replace the bolts and tighten down.

     

     

    We have sent you 4 shims.  Sometimes, in the MOST EXTREME cases, you will need to use two shims per locating pin.  I would start with 1 shim, and if that does not solve the problem, add another shim.